Configuration Procedure - Emerson Micro Motion 2700 Configuration And Use Manual

Configuration
Table 4-8 Petroleum measurement reference temperature tables
CTL
derivation
Table method Base temperature
5A Method 1 60 °F, non-configurable
5B Method 1 60 °F, non-configurable
5D Method 1 60 °F, non-configurable
23A Method 1 60 °F, non-configurable
23B Method 1 60 °F, non-configurable
23D Method 1 60 °F, non-configurable
53A Method 1 15 °C, configurable
53B Method 1 15 °C, configurable
53D Method 1 15 °C, configurable
6C Method 2 60 °F, non-configurable
24C Method 2 60 °F, non-configurable
54C Method 2 15 °C, configurable
4.6.2

Configuration procedure

The petroleum measurement configuration parameters are listed and defined in Table 4-9.
Table 4-9 Petroleum measurement parameters
Variable Description
Table type Specifies the table that will be used for reference temperature and reference density unit. Select
the table that matches your requirements. See Petroleum measurement reference tables.
(1)
User defined TEC Thermal expansion coefficient. Enter the value to be used in CTL calculation.
(2)
Temperature units Read-only. Displays the unit used for reference temperature in the reference table.
Density units Read-only. Displays the unit used for reference density in the reference table.
Reference Read-only unless Table Type is set to 53x or 54x. If configurable:
temperature • Specify the reference temperature to be used in CTL calculation.
• Enter reference temperature in °C.
(1) Configurable if Table Type is set to 6C, 24C, or 54C.
(2) In most cases, the temperature unit used by the petroleum measurement reference table should also be the temperature unit configured
for the transmitter to use in general processing. To configure the temperature unit, see Section 4.5.
Setting the table type
To set the petroleum measurement table type, refer to the flowcharts in Figure 4-4.
Configuration and Use Manual
Density unit and range
Degrees API Base density
0 to +100
0 to +85
–10 to +40
610 to 1075 kg/m
653 to 1075 kg/m
825 to 1164 kg/m
Reference temperature
60 °F
60 °F
15 °C
Relative density
0.6110 to 1.0760
0.6535 to 1.0760
0.8520 to 1.1640
3
3
3
Supports
Degrees API
Relative density
3
Base density in kg/m
57