Configure The Precision Of Variables Shown On The Display - Emerson Micro Motion 2700 Configuration And Use Manual

Display variable
Display Variable 10
Display Variable 11
Display Variable 12
Display Variable 13
Display Variable 14
Display Variable 15
Configure Display Variable 1 to track the primary mA output
Display
ProLink II
ProLink III
Field Communicator Not available
Overview
You can configure Display Variable 1 to track mA Output Process Variable for the primary mA
output. When tracking is enabled, you can control Display Variable 1 from the display menu.
Tip
This feature is the only way to configure a display variable from the display menus, and it applies only
to Display Variable 1.
Procedure
Configure Display Variable 1 to track the primary mA output.
Display Variable 1 will automatically be set to match mA Output Process Variable for the primary
mA output. If you change the configuration of mA Output Process Variable, Display Variable 1
will be updated automatically.
5.1.3 Configure the precision of variables shown on the
display
Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Display > Decimal Places
Configuration and Use Manual
Process variable assignment
None
None
None
None
None
None
OFF-LINE MAINT > OFF-LINE CONFG > DISPLY > VAR 1
ProLink > Configuration > Display > Display Options > Display Variable 1 Selection
Device Tools > Configuration > Transmitter Display > Display Security
Not available
ProLink > Configuration > Display > Display Precision
Device Tools > Configuration > Transmitter Display > Display Variables
Configure device options and preferences
79