Totalizer Block Parameters - Emerson Micro Motion 2700 Configuration And Use Manual

Model 2700 PROFIBUS Block Parameters
Table F-17 AO function block views
17 ST_REV
18 TAG_DESC
19 STRATEGY
20 ALERT_KEY
21 TARGET_MODE
22 MODE_BLK
23 ALARM_SUM
Overall sum of bytes in View Object
OD Parameter Mnemonic
Index
Standard Parameters
28 READBACK
47 POS_D
49 CHECK_BACK
61 Overall sum of bytes in View Object
(+ 13 Standard parameters bytes)
F.4.13

Totalizer block parameters

Table F-18 lists the parameters for the totalizer blocks.
Table F-18 Totalizer block parameters
Index Parameter Mnemonic
Standard PA parameters
16 BLOCK_OBJECT
17 ST_REV
18 TAG_DESC
19 STRATEGY
20 ALERT_KEY
21 TARGET_MODE
22 MODE_BLK
23 ALARM_SUM
24 BATCH
Configuration and Use Manual
Definition Message
Type
This object contains the RECORD
characteristics of the block
A block has static block SIMPLE
parameters that are not
changed by the process.
Values are assigned to this
parameter during the
configuration of optimization.
The value of ST_REV
increases by 1 after every
change of a static block
parameter.
Every block can be assigned SIMPLE
a textual TAG description.
The TAG_DESC must be
unambiguous and unique in
the field bus system.
Grouping of function block. SIMPLE
The STRATEGY field can be
used to group blocks.
This parameter contains the SIMPLE
identification number of the
plant unit.
This parameter contains SIMPLE
desired mode normally set by
a control application of an
operator. The modes are
valid alternatively only, i.e.
only one mode can be set at
one time. A write access to
this parameter with more than
one mode is out of the range
of the parameter and has to
be rejected.
This parameter contains the RECORD
current mode and the
permitted and normal mode
of the block.
This parameter contains the RECORD
current states of the block
alarms.
This parameter is intended to RECORD
be used in Batch applications
in line with IEC 61512 Part 1.
Only Function Blocks carry
this parameter. There is no
algorithm necessary within a
Function Block.
2
3
8
13
View 1 View 2
5
2
3
10+13
Data Type/ Size Store Default Access
Structure /Rate Value
(HZ)
DS-32 20 S ---- R
Unsigned16 2 N 0 R
OCTET 32 S ' ' R/W
STRING
Unsigned16 2 S 0 R/W
Unsigned8 1 S 0 R/W
Unsigned8 1 S Auto R/W
(0x08)
---
DS-37 3 D R
DS-42 8 D 0,0,0, R
0
DS-67 10 S 0,0,0, RW
0
View 3 View 4
Enumerated List of Modbus
Values / Range Register /
Coil
NA NA
NA NA
NA NA
NA NA
NA NA
0x08 – Auto R-2287
0x10 – Manual
0x80 – OOS
NA R-2288
NA NA
NA NA
185