Emerson Micro Motion 2700 Configuration And Use Manual page 17

Startup
Table 2-2 Process variables by transducer block channel (continued)
12 (0x0C) 51 (0x33)
12 (0x0C) 52 (0x34)
12 (0x0C) 53 (0x35)
To configure the AI function block channels:
• With the EDD, bus parameters, or ProLink II, see the menu flowcharts in Figure 2-1.
• With the display, see the menu flowchart in Figure B-14.
Figure 2-1 Configuring channels and units – EDD, bus parameters, and ProLink II
Bus parameters
Block: Analog Input Block (Slots 1, 2, 3, and 5)
Channel
Index: 30 (transducer block channel)
Block: Analog Input Block (Slots 1, 2, 3, and 5)
AI Block units
Index 28, Parameter 3 (units index)
AO Block Block: Analog Output Block (Slots 9 and 10)
units Index 27, Parameter 3 (units index)
Configuration and Use Manual
0x0C33 Concentration measurement – net volume flow
0x0C34 Concentration measurement – concentration
0x0C35 Concentration measurement – Baume
EDD
ProLink II
ProLink >
Configuration
Function blocks tab
Select a channel for each
AI function block
Select units for each AI
and AO function block
Apply
9