Transducer Block 2 (Device Information, Api, Cm) Parameters - Emerson Micro Motion 2700 Configuration And Use Manual

Model 2700 PROFIBUS Block Parameters
F.4.3

Transducer block 2 (device information, API, CM) parameters

Table F-8 shows the parameters for transducer block 2.
Table F-8 Transducer block 2 parameters
Index Parameter Mnemonic
Standard PA parameters
0 BLOCK_OBJECT
1 ST_REV
2 TAG_DESC
3 STRATEGY
4 ALERT_KEY
5 TARGET_MODE
6 MODE_BLK
7 ALARM_SUM
DEVICE INFORMATION BLOCK
Transmitter Data
8 SYS_FeatureKey
(DD Name: Enabled Features)
9 SYS_CEQ_Number
(DD Name: CP ETO)
Sensor Data
10 SNS_SensorSerialNum
(DD Name : Sensor Serial
Number)
11 SNS_SensorType
(DD Name: Sensor Model
Number)
12 SNS_SensorTypeCode
(DD Name: Sensor Type
Code)
13 SNS_SensorMaterial
(DD Name : Sensor Material)
14 SNS_LinerMaterial
(DD Name : Sensor Liner)
172
Definition Message Type
This object contains the RECORD
characteristics of the block
A block has static block SIMPLE
parameters, that are not
changed by the process.
Values are assigned to this
parameter during the
configuration of optimization.
The value of ST_REV
increases by 1 after every
change of a static block
parameter.
Every block can be assigned SIMPLE
a textual TAG description.
The TAG_DESC must be
unambiguous and unique in
the field bus system.
Grouping of function block. SIMPLE
The STRATEGY field can be
used to group blocks.
This parameter contains the SIMPLE
identification number of the
plant unit.
This parameter contains SIMPLE
desired mode normally set by
a control application of an
operator. The modes are
valid alternatively only, i.e.
only one mode can be set at
one time. A write access to
this parameter with more
than one mode is out of the
range of the parameter and
has to be rejected.
This parameter contains the RECORD
current mode and the
permitted and normal mode
of the block.
This parameter contains the RECORD
current states of the block
alarms.
Enabled Features STRING
Model 2700 Transmitter CEQ VARIABLE
Number
Sensor serial number VARIABLE
Sensor type (i.e. F200, STRING
CMF025)
Sensor type code ENUM
Sensor Material ENUM
Liner Material ENUM
Data Type/ Size Store Default
Structure /Rate Value
(HZ)
DS-32 20 S ----
Unsigned16 2 N 0
OCTET 32 S ' '
STRING
Unsigned16 2 S 0
Unsigned8 1 S 0
Unsigned8 1 S AUTO
(0x08)
DS-37 3 D ---
DS-42 8 D 0,0,0,0
BIT_ENUM 2 S -
ERATED
Unsigned16 2 S S/W
Rev
Unsigned32 4 S 0
OCTET 16 S ""
STRING
Unsigned16 2 S 0
Unsigned16 2 S 0
Unsigned16 2 S 0
Model 2700 Transmitter with PROFIBUS-PA
Acce Enumerated List of Modbus
ss Values / Range Register / Coil
R NA NA
R NA NA
R/W NA NA
R/W NA NA
R/W NA NA
R/W AUTO (0x08) NA
R NA NA
R NA NA
R 0x0000 = standard R-5000
0x0800 = Meter
Verification
0x0008 = Enh.
Density
0x0010 = API
R/W N/A R-5005
and
R/W >=0 R-0127-128
<=
16777215.0f
R/W N/A R-0425
R/W 0 = Curve Tube R-1139
1 = Straight Tube
R/W 0 = None R-0130
3 = Hastelloy C-22
4 = Monel
5 = Tantalum
6 = Titanium
19 = 316L stainless
steel
23 = Inconel
252 = Unknown
253 = Special
R/W 0 = None R-0131
10 = PTFE (2larms)
11 = Halar
16 = Tefzel
251 = None
252 = Unknown
253 = Special