Emerson Micro Motion 2700 Configuration And Use Manual page 194

Model 2700 PROFIBUS Block Parameters
Table F-18 Totalizer block parameters (continued)
Index Parameter Mnemonic
25 RESERVED
Totalizer Function Block Standard Parameters
26 TOTAL
(DD Name: TOT Total)
27 UNIT_TOT
(DD Name: TOT Total Units)
28 CHANNEL
(DD Name: TOT Channel)
29 SET_TOT
(DD Name: TOT Set Total)
30 MODE_TOT
(DD Name: TOT Mode Total)
31 FAIL_TOT
(DD Name: TOT Fail Total)
32 PRESET_TOT
(DD Name: TOT Preset Total)
33 ALARM_HYS
(DD Name: TOT Alarm Hys)
34 HI_HI_LIM
(DD Name: TOT Hi Hi Lim)
35 HI_LIM
(DD Name: TOT Hi Lim)
36 LO_LIM
(DD Name: TOT Lo Lim)
37 LO_LO_LIM
(DD Name: TOT Lo Lo Lim)
38 RESERVED
39 RESERVED
40 RESERVED
41 RESERVED
42 RESERVED
43 RESERVED
44 RESERVED
45 RESERVED
46 RESERVED
47 RESERVED
48 RESERVED
49 RESERVED
50 RESERVED
186
Definition Message
Type
The Function Block RECORD
parameter TOTAL contains
the integrated quantity of the
rate parameter provided by
CHANNEL and the
associated status.
Unit of the totalized quantity. SIMPLE
Reference to the active SIMPLE
Transducer Block, which
provides the measurement
value to the Function Block.
Reset of the internal value of SIMPLE
the FB algorithm to 0 or set
this value to PRESET_TOT.
This Function Block SIMPLE
parameter governs the
behavior of the totalization.
Fail-safe mode of the Totalizer SIMPLE
Function Block. This
parameter governs the
behavior of the Function
Block during the occurrence
of input values with BAD
status.
This value is used as a preset SIMPLE
for the internal value of the
FB algorithm. The value
get effective if using the
SET_TOT function.
Hysteresis SIMPLE
Value for upper limit of alarms SIMPLE
Value for upper limit of SIMPLE
warnings
Value for lower limit of SIMPLE
warnings
Value for the lower limit of SIMPLE
alarms
Data Type/ Size Store Default
Structure /Rate Value
(HZ)
101 5 N 0
Unsigned16 2 S direct
integr
al of
the
chan
nel
value
unit
Unsigned16 2 S ---
Unsigned8 1 N 0 –
Totaliz
e
Unsigned8 1 N 0:
BAL
ANCE
D
Unsigned8 1 S 0 –
Run
Float 4 S 0
Float 4 S 0
Float 4 S Max
Value
Float 4 S Max
Value
Float 4 S Min
Value
Float 4 S Min
Value
Model 2700 Transmitter with PROFIBUS-PA
Access Enumerated List of
Values / Range
R/W ( NA
Can be
written
only in
Manual
mode)
R/W NA
R/W NA
R/W 0: TOTALIZE
1: RESET
2: PRESET
R/W 0: BALANCED
1: POS_ONLY
2: NEG_ONLY
3: HOLD
R/W 0: RUN
1: HOLD
2: MEMORY
R/W NA
R/W NA
R/W NA
R/W NA
R/W NA
R/W NA
Modbus
Register /
Coil
NA
R-2290
R-2289
R-2292
R-2293
NA
NA
NA
NA
NA
NA
NA