Chapter 1 Before You Begin; Overview; Safety; Determining Transmitter Information - Emerson Micro Motion 2700 Configuration And Use Manual

Chapter 1
Before You Begin
1.1

Overview

This chapter provides an orientation to the use of this manual, and includes a configuration overview
flowchart and a pre-configuration worksheet. This manual describes the procedures required to start,
configure, use, maintain, and troubleshoot Micro Motion
PROFIBUS-PA.
1.2

Safety

Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
1.3

Determining transmitter information

Transmitter options are indicated by the model number located on the transmitter tag. The model
number is a string of the following form:
2700 * 1 * G * * * * * *
Configuration and Use Manual
®
Model 2700 transmitters with
Software code 2:
C = Smart Meter Verification
Software code 1:
G = Concentration measurement application
A = Petroleum measurement (API) application
Output option code
• G = PROFIBUS-PA
Display code
• 1 = Display with glass lens
• 2 = Backlit display with glass lens
• 3 = No display
• 5 = Backlit display with IIC approval, glass lens
• 7 = Backlit display with non-glass lens
Mounting code:
• R = 4-wire remote mount
• I = Integral mount
• B = 4-wire remote mount to 9-wire remote core processor
• C = 9-wire remote mount
1