Device State Control - Fujitsu FR60 Hardware Manual

3.13 Device State Control

This section describes the states of the FR family and their control. It also describes
low-power mode.
■ Device States
The FR family has the operating states listed below.
For more information about these states, see Section "3.13.1
Transitions".
• RUN state (normal operation)
• Sleep state
• Stop state
• Oscillation stabilization wait RUN state
• Oscillation stabilization wait reset (RST) state
• Operation initialization reset (RST) state
• Settings initialization reset (INIT) state
■ Low-power Modes
The following two low-power modes are provided.
For more information, see Section "3.13.2 Low-power Modes".
• Sleep mode
• Stop mode
CHAPTER 3 CPU AND CONTROL UNITS
Device States and State
131