CHAPTER 13 UART
13.1 Overview of the UART
The UART is a serial I/O port used to perform asynchronous (start-stop
synchronization) communication and CLK synchronous communication.
The MB91301 series has three UART channels.
■ Features of the UART
The UART has the following features:
•
Full-duplex double buffer
•
Either asynchronous (start-stop synchronization) or CLK synchronous communication can be
selected.
•
Multiprocessor mode is supported.
•
Fully programmable baud rate: An arbitrary baud rate can be set using a built-in timer.
•
An external clock can be used to set a baud rate.
•
Error detection functions (parity, framing, overrun)
•
The transfer signal is an NRZ code.
•
DMA transfer is started as the result of an interrupt.
360
(See "CHAPTER 8 U-TIMER".)