Table 4-11 Network 1: Configure Parameters Menu (9902) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Modbus Ethernet Communication
4.3 Parameter Assignment/Addressing
Table 4-11 Network 1: Configure Parameters Menu (9902)
Parameter ID
Velocity Units 9080
Demand Scalar 9912
Aux Demand Scalar 9913
Network Timeout 9934
Table 4-12 Network 1: TCP/IP Setup Menu (9300) when "Ethernet Modbus Type" (9906) is set to "Internal CPU"
Parameter ID
IP Address 9310
Subnet Mask 9320
Gateway Address 9330
Only valid for NXGpro software version 6.1 and earlier
1
Table 4-13 Network 1: TCP/IP Setup Menu (9902) when "Ethernet Modbus Type" (9906) is set to "Anybus Module"
Parameter ID
IP Address 9960
Subnet Mask 9961
Gateway Address 9962
NXGpro software version 6.1 and earlier uses this table or the preceeding table specifiying TCP/IP parameters.
1
NXGpro software version 6.2 and greater uses only this table.
2
Table 4-14 Network 1: Register Data from Drive Menu (9400)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
84
Unit Default
%
1
1
0
Unit Default
172.16.20.16
255.255.0.0
172.16.1.1
Unit Default
172.16.20.18
255.255.0.0
172.17.1.1
ID Unit Default
9401 General Sta‐
tus
9402 Motor Speed
9403 to None
9464
Min Max Description
Designate the units for velocity values from
the drive:
● %
● RPM
● Hz
-125 125 Set the scalar for input demand reference
from the network.
-125 125 Set the auxiliary scalar for input demand
reference from the network.
0 65535 Set the timeout for network determined to
be non-responsive.
Min Max Description
Set the system TCP/IP address.
Set the system TCP/IP subnet mask.
Set the system TCP/IP gateway address.
Min Max Description
Set the system TCP/IP address.
Set the system TCP/IP subnet mask.
Set the system TCP/IP gateway address.
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
1
NXGpro Communication
Function Manual, AB, A5E33486415A
1,2