Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 108

Ethernet / IP Communication
5.1 AnyBus Ethernet/IP Module
The table explains the status indicators.
Status Indicator Indication
(figure number)
1 Link present
2 Module status
3 Network status
4 Data activity
This chapter contains instructions for controlling the drive using a PLC over an Ethernet / IP
network. It addresses the following topics:
● Description of the interface
● User Programming
● Parameter assignment and addressing
● Configuration and setup options
● Available functions
108
State Description
On The module has a link.
Off The module does not sense a link.
Off No power applied to the module.
Green The module is operating correctly.
Green, flashing The module has not been configured.
Red A major internal error has been detected.
Red, flashing A minor recoverable fault has been detected.
Green / red flashing The module is performing a power-on self-test.
Green The module has at least one Ethernet/IP connection.
Green Flashing There are no Ethernet/IP connections established.
Flashing A packet is being received or transmitted.
NXGpro Communication
Function Manual, AB, A5E33486415A