Pick List Variable Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Ethernet / IP Communication
5.4 Parameter Assignment/Addressing
Table 5-15 Network 2: Register Data from Drive Menu (9500)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
Table 5-16 Network 2: Register Data to Drive Menu (9700)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64 9703 to
See also
Network Interfaces (Page 130)
Network Setup Procedure (Page 131)
5.4.4

Pick List Variable Tables

Table 5-17 Data from Drive Pick List Variables
Name
None
Man Id
120
ID Unit Default
9501 General Sta‐
tus
9502 Motor Speed
9503 to None
9564
ID Unit Default
9701 Fixed Reg
Bits
9702 Velocity De‐
mand
None
9764
Manual ID Unit Scaling
None None None
None None None
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
16 Bit Data Notes
Type
None None
None Refer to Appendix
Internal Drive Network
NXGpro Communication
Function Manual, AB, A5E33486415A