Chapter 4 - Parameters And Menu Structure - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure

Wizards
Quick Setup (M1) P1.17 PID Mini-Wizard
P1.18 Multi-Pump Wizard
All basic parameters
required to quickly setup
P1.19 Startup Wizard
the BT300 VFD for
operation and all available P1.20 Fire Mode Wizard
wizards.
P1.21 Bypass Wizard
Monitor (M2) M2.1 Multimonitor
M2.2 Basic
Access to the Multi-
monitor display and
M2.3 Timer Functions
parameters used for
monitoring. M2.4 PID Controller 1
M2.5 PID Controller 2
M2.6 Multi-Pump
M2.8 Fieldbus Data
M2.9 Temp. Inputs
Parameters (M3) M3.1 Motor Settings
M3.2 Start/Stop Setup
Parameters used for
basic and advanced
M3.3 References
configuration
requirements. M3.4 Ramps and Brakes
M3.5 I/O Config
M3.5.1 Digital Inputs
M3.5.2 Analog Inputs
M3.5.3 Digital Outputs
M3.5.4 Analog Outputs
M3.6 Fieldbus DataMap
M3.7 Prohibit Freq
M3.8 Limit Superv
M3.9 Protections
M3.10 Automatic Reset
M3.11 Timer Function
M3.12 PID Controller 1
M3.13 PID Controller 2
M3.14 Multi-Pump
M3.16 Fire Mode
M3.17 Appl. Setttings
M3.18 Bypass
28 | 180
Siemens Industry, Inc.
Building Technologies
Chapter 4 - Parameters and Menu Structure
All information and parameters are organized in a menu structure:
Diagnostics (M4)
Diagnostics information such
as active faults, fault history
and counters.
I/O and Hardware (M5)
Parameters for status of I/O,
real time clock, keypad, and
fieldbus configuration.
User Settings (M6)
User information such as
keypad language selection,
parameter backup/restore, and
drive name.
Favorites (M7)
List of user-defined parameter
list.
User Levels (M8)
Restricts the visibility of
parameters
Displayed based on value of Protocol (P5.8.1.1)
2 1
Displayed based on value of Bypass (P3.17.4)
2
Siemens BT300 HVAC Drive
M4.1 Active Faults
M4.2 Reset Faults
M4.3 Fault History
M4.4 Total Counters
M4.5 Trip Counters
M4.6 Software Info
M5.1 Basic IO
M5.2 Slot C
M5.3 Slot D
M5.4 Slot E
M5.5 Real Time Clock
M5.6 Power Unit Settings
M5.7 Keypad
M5.8 RS-485
M5.8.1 Common Settings
M5.8.3 BACnet MSTP
1
M5.8.3 Modbus RTU
1
M5.8.3 N2
1
M5.8.3 P1
1
M5.9 Ethernet
M5.9.1 Common Settings
M5.9.2 Modbus TCP
M5.9.3 BACnet IP
M6.1 Language Selection
M6.5 Parameter Backup
M6.6 Parameter Compare
M6.7 Drive Name
P8.1 User Level
P8.2 Access Code
DPD01809
2016-06-07