Table 6-15 Network 2: Configure Parameters Menu (9916) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Profibus Communication
6.3 Parameter Assignment/Addressing
Table 6-15 Network 2: Configure Parameters Menu (9916)
Parameter ID
Profibus Address 9918
Velocity Units 9924
Demand Scalar 9926
Aux Demand Scalar 9927
Network 2 I/O Size 9952
Net 2 Swap Bytes 9954
Table 6-16 Network 2: Register Data from Drive Menu (9500)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
Table 6-17 Network 2: Register Data to Drive Menu (9700)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64 9703 to
148
Unit Default Min
2 2
%
1 -125
1 -125
136 16
Off
ID Unit Default
9501 General Sta‐
tus
9502 Motor Speed
9503 to None
9564
ID Unit Default
9701 Fixed Reg
Bits
9702 Velocity De‐
mand
None
9764
Max Description
124 Set the address of the node on the Profibus network.
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
125 Set the scalar for input demand reference from the
network.
125 Set the auxiliary scalar for input demand reference
from the network.
136 Select the number of input and output data bytes.
Swap register byte order:
● Off
● On
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
NXGpro Communication
Function Manual, AB, A5E33486415A