Parameter Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

ProfiDrive Communication
7.2 Parameter Assignment/Addressing
7.2.2

Parameter Tables

Network Parameters
Table 7-3 Network 1 to 2 Register Copy (9946)
Parameter ID
Net 1 to 2 reg. copy 9946
Network 1 Parameters
Table 7-4 Network 1: Configure Menu (9900)
Parameter ID
Network 1 Type 9901
Table 7-5 Network 1: Configure Parameters Menu (9902)
Parameter ID
Profibus Address 9904
Net 1 Swap Bytes 9953
Telegram Number 9958
170
Unit Default
Function
Unit Default Min
None
Unit Default
2
Off
1
Min Max Description
Copy Network 1 registers to Network 2
registers.
Max Description
Designate the type of external network connected to
the drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Min Max Description
2 124 Set the address of the node on the Profibus
network.
Swap register byte order:
● Off
● On
Select the active ProfiDrive telegram:
● 1
● 2
● 20
● 352
● 999
● 998
NXGpro Communication
Function Manual, AB, A5E33486415A