ProfiDrive Communication
7.1 Description
7.1
Description
The drive supports ProfiDrive™ communication via the Anybus™ Profibus™ DP-V1 IM module.
ProfiDrive™ communication functions in the following way:
● Cyclic data is supported via standard ProfiDrive™ telegrams.
● Acyclic read/write services allow read/write access to drive menu parameters.
● The drive acts as a slave (passive station) on the Profibus™ network. The drive auto detects
the baud rate from the network.
The module supports the following baud rates:
● 9.6 kbit/sec
● 19.2 kbit/sec
● 93.75 kbit/sec
● 187.5 kbit/sec
● 500 kbit/sec
● 1.5 Mbit/sec
● 3 Mbit/sec
● 6 Mbit/sec
● 12 Mbit/sec.
To enable dual network functionality, this protocol requires an additional Anybus™ module.
164
NXGpro Communication
Function Manual, AB, A5E33486415A