Table 8-9 Network 1 To 2 Register Copy (9946) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

DeviceNet (Profile 12) Communication
8.3 Parameter Assignment/Addressing
Table 8-9 Network 1 to 2 Register Copy (9946)
Parameter ID
Net 1 to 2 reg. copy 9946
Network 1 Parameters
Table 8-10 Network 1: Configure Menu (9900)
Parameter ID
Network 1 Type 9901
Table 8-11 Network 1: Configure Parameters Menu (9902)
Parameter ID
DeviceNet Baud 9905
Rate
DeviceNet Address 9908
Velocity Units 9080
Demand Scalar 9912
Aux Demand Scalar 9913
Network 1 I/O Size 9951
200
Unit Default
Function
Unit Default Min
None
Unit Default Min
125K
10 1
%
1 -125
1 -125
136 16
Min Max Description
Copy Network 1 registers to Network 2
registers.
Max Description
Designate the type of external network connected to
the drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Max Description
Set the DeviceNet network baud rate:
● 125K
● 250K
● 500K
63 Set the address of the node on the DeviceNet network.
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
125 Set the scalar for input demand reference from the net‐
work.
125 Set the auxiliary scalar for input demand reference
from the network.
136 Select the number of input and output data bytes.
NXGpro Communication
Function Manual, AB, A5E33486415A