Anybus Modbus Ethernet Module - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

4.1.2

Anybus Modbus Ethernet Module

Description
Note
Network Usage
The Anybus™ Ethernet module is the only hardware that can be used for Network 2 .
The following figure shows the connector and status indicators on the Anybus™ Modbus™
Ethernet module. The DIP switches are not used for the NXGpro application.
1
2
3
Figure 4-1
Status Indicators
The following figure shows the status indicators.
Figure 4-2
NXGpro Communication
Function Manual, AB, A5E33486415A
RJ-45 connector
DIP switches (not used)
Status indicators
Anybus Ethernet Module
Status Indicators
Modbus Ethernet Communication
4.1 Description
75