Table 9-10 Network 1: Configure Menu (9900) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

ControlNet Communication
9.3 Parameter Assignment/Addressing
Network 1 Parameters
Table 9-10 Network 1: Configure Menu (9900)
Parameter ID
Network 1 Type 9901
Table 9-11 Network 1: Configure Parameters Menu (9902)
Parameter ID
ControlNet Address 9903
ControlNet Header 9956
Velocity Units 9080
Demand Scalar 9912
Aux Demand Scalar 9913
Table 9-12 Network 1: Register Data from Drive Menu (9400)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
226
Unit Default Min
None
Unit Default Min
9 1
Off
%
1 -125
1 -125
ID Unit Default
9401 General Sta‐
tus
9402 Motor Speed
9403 to None
9464
Max Description
Designate the type of external network connected to
the drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Max Description
99 Set the address of the node on the ControlNet network.
Set the ControlNet header:
● Off
● On
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
125 Set the scalar for input demand reference from the net‐
work.
125 Set the auxiliary scalar for input demand reference from
the network.
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
NXGpro Communication
Function Manual, AB, A5E33486415A