Pick List Variable Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

DeviceNet (Profile 12) Communication
8.3 Parameter Assignment/Addressing
Parameter ID
Velocity Units 9924
Demand Scalar 9926
Aux Demand Scalar 9927
Network 2 I/O Size 9952
Table 8-16 Network 2: Register Data from Drive Menu (9500)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
Table 8-17 Network 2: Register Data to Drive Menu (9700)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64 9703 to
8.3.3

Pick List Variable Tables

Table 8-18 Data from Drive Pick List Variables
Name
None
Man Id
202
Unit Default
%
1
1
136
ID Unit Default
9501 General Sta‐
tus
9502 Motor Speed
9503 to None
9564
ID Unit Default
9701 Fixed Reg
Bits
9702 Velocity De‐
mand
None
9764
Manual ID Unit Scaling
None None None
None None None
Min Max Description
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
-125 125 Set the scalar for input demand reference from the
network.
-125 125 Set the auxiliary scalar for input demand reference
from the network.
16 136 Select the number of input and output data bytes.
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
16 Bit Data
Type
None
None
Notes
None
Refer to Appendix Internal Drive Network
NXGpro Communication
Function Manual, AB, A5E33486415A