Parameter Assignment/Addressing; Overview: Parameter Assignment/Addressing; Correspondence Between Drive Parameter Id And Communication Protocol Address - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Ethernet / IP Communication

5.4 Parameter Assignment/Addressing

5.4 Parameter Assignment/Addressing
5.4.1

Overview: Parameter assignment/addressing

This section provides the following information for communication configuration and
programming:
● Drive parameter ID and corresponding communication protocol address
● Parameter tables:
– Network configuration parameters
– Network 1 configuration parameters
– Network 2 configuration parameters
● Pick list variable tables:
– Data from Drive variables
– Data to Drive variables (with scaling and range)
5.4.2 Correspondence between Drive Parameter ID and Communication Protocol
Address
The following table provides drive parameter IDs and the corresponding Modbus™ addresses.
The following data is provided:
● Parameter ID
The drive parameter ID number to enter via the keypad or the ToolSuite.
● Data From Drive
Data that the PLC will receive from the drive to determine how the drive is functioning.
Each register contains a 16-bit digital representation of the status of a particular aspect of
drive functionality.
Some registers are fixed to track certain drive functions; others are programmable to track
any of a number of drive status choices.
● Data To Drive
Data that the PLC will send to the drive to control it.
Each register contains a 16-bit digital representation of the PLC's command for a particular
aspect of drive functionality.
Some registers are fixed to control certain functions; others are programmable to control
any of a number of drive function choices.
Table 5-6 Correspondence between Drive Parameter ID and Modbus Address
Network Parameter ID
1 9401
1 9402
1 9403 to 9464
1 9601
116
Description
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
Data To Drive 01
Default Contents
General Status (not changeable)
Motor Speed (not changeable)
None
Fixed Register Bits (not changeable)
NXGpro Communication
Function Manual, AB, A5E33486415A