B.1 Output Data Ids - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Output Data IDs
B.1 Output data IDs
Overview
Use output data ID numbers to enter variables that are not listed or detailed in the pick list.
Note
The output data ID number is not the same as a parameter ID number.
Output data ID numbers for read commands are listed in the following tables:
● General data register assignments
● Serial Flags: The 64 available bits can be used with any other valid input or output bits, for
example, packing bits from multiple addresses into a single telegram.
● Network 1 and 2 Output flags
● WAGO™ inputs and outputs (I/O)
● Internal digital I/O
● Cell temperature
● Fault and Alarm
● All other data
NXGpro Communication
Function Manual, AB, A5E33486415A
B
277