Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 300

Display Network Monitor
7
8
Note
The only network that supports global data is Modbus™ Plus.
All other networks do not support global data for the global or non-global register.
Editing Values in the Display
Underscores on the display (as shown in the previous figure) indicate that values can be edited
in these areas.
To edit values in the display:
● Use the left and right arrow keys to move the cursor horizontally.
● Use the up and down arrow keys to edit alphabetical fields.
● Use the up and down arrow keys or the numeric keys to edit numerical fields.
● To move the cursor to the second line, continue pressing the right arrow key after reaching
the end of the first line.
● To move the cursor back to the first line, continue pressing the right arrow key after reaching
the end of the second line.
● Use the left arrow key in the same manner to move the cursor in the opposite direction.
300
Line 1 data
Line 2 data
Line 1 in the example diagram provides the following
information:
● register value in decimal format
● register is in network 1
● data is going to the drive
● register is non-global
● register is number 1
● register value is 257
Line 2 in the example diagram provides the following
information:
● register value in hexadecimal format
● register is in network 2
● data is coming from the drive
● register is non-global
● register is number 2
● register value is 0xF1B
NXGpro Communication
Function Manual, AB, A5E33486415A