Optional Hardware Requirement For Dual Networks - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Introduction

1.4 Optional Hardware requirement for Dual Networks

1.4 Optional Hardware requirement for Dual Networks
The NXGpro Control supports dual networks, utilizing network 1 and network 2. To enable
dual network functionality, a protocol may require additional hardware, for example, an
additional Anybus™ module.
Refer to the
hardware requirements and setup options are detailed.
22
Description Section of the chapter for a particular protocol where additional
NXGpro Communication
Function Manual, AB, A5E33486415A