Table 8-1 Status Indicator Descriptions - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

The table explains the status indicators.
Table 8-1 Status Indicator Descriptions
Status Indicator Indication
(figure number)
1 Reserved
2 Network status
3 Module status
4 Reserved
Termination Resistor
The physical end nodes in a DeviceNet™ network must each have a termination resistor
installed.
The termination resistor is connected across the data lines. Refer to the recommendations of
the ODVA for values of network termination resistors.
NXGpro Communication
Function Manual, AB, A5E33486415A
State Description
N/a Reserved for future use.
Off Not powered or not online.
Green Link OK, on line and connected.
Green, flashing On line, not connected.
Red Critical link failure.
Red, flashing Connection timeout.
Off No power to drive.
Green Device operational.
Green, flashing Data size bigger than configured.
Red Unrecoverable fault.
Red, flashing Minor fault.
N/a Reserved for future use.
DeviceNet (Profile 12) Communication
8.1 Description
193