Parameter Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

4.3.2

Parameter Tables

Network Parameters
Table 4-8 Network Control Menu (9943)
Parameter ID
Net Control Type 9944
Start Stop Control 9945
Table 4-9 Network 1 to 2 Register Copy (9946)
Parameter ID
Net 1 to 2 reg. copy 9946
Network 1 Parameters
Table 4-10 Network 1: Configure Menu (9900)
Parameter ID
Network 1 Type 9901
Ethernet Modbus 9906
Type
(only valid for
NXGpro software
version 6.1 and ear‐
lier)
NXGpro Communication
Function Manual, AB, A5E33486415A
Unit Default
SOP
Maintained
Unit Default
Function
Unit Default Min
None
Internal
(CPU)
Modbus Ethernet Communication
4.3 Parameter Assignment/Addressing
Min Max Description
Set bit definition:
● SOP
● Fixed
Set Start/Stop bit inputs:
● Maintained
● Momentary
Min Max Description
Copy Network 1 registers to Network 2
registers.
Max Description
Designate the type of external network connected to
the drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Select the type of Modbus Ethernet connection to the
drive:
● Internal (CPU)
● Anybus Module
83