Description; Ethernet/Ip Description; Network Configuration Options - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

5.2

Description

5.2.1

Ethernet/IP Description

The following information provides an overview of the Anybus™ Ethernet module which:
● acts as a Group 2 and 3 server on an Ethernet/IP network. Ethernet I/P is based on the
Common Industrial Protocol (CIP)
● is configured as a communication adapter (Profile 12).
● uses Assembly #150 for O→T data (data sent to the NXGpro Control)
● uses Assembly #100 for T→O data (data sent from the NXGpro Control)
● supports input and output data sizes of 2 to 128 bytes
● has an RJ45 for connection to a network
To enable dual functionality, this protocol requires an additional Anybus™ module.
5.2.2

Network Configuration Options

This section provides information on the configuration options for the fiber optic board and the
Anybus™ Ethernet module for dual network functionality.
● Network 1 communication is supported via an Anybus™ module as described in the
following section.
● Network 2 communication is supported via an Anybus™ module as described in the
following section.
Note
The CPU Ethernet connection does not support Ethernet/IP communication.
NXGpro Communication
Function Manual, AB, A5E33486415A
Ethernet / IP Communication
5.2 Description
109