Arp Inspection Log Status - ZyXEL Communications GS2210-8 User Manual

Figure 164 Advanced Applicat ion > I P Source Guard > I Pv4 Source Guard Set up > ARP I nspect ion
> VLAN St at us
The following t able describes t he labels in t his screen.
Table 106 Advanced Applicat ion > I P Source Guard > I Pv4 Source Guard Set up > ARP I nspect ion >
VLAN St at us
LABEL
Show VLAN range
Enabled VLAN
Select ed VLAN
Apply
VI D
Received
Request
Reply
Forwarded
Dropped

26.9 ARP Inspection Log Status

Use t his screen t o look at log m essages t hat were generat ed by ARP packet s and t hat have not
been sent t o t he syslog server yet . To open t his screen, click Adva nce d Applica t ion > I P Sour ce
Gu a r d > I Pv4 Sou r ce Gua r d Se t u p > ARP I n spe ct ion > Log St a t u s.
Chapter 26 IP Source Guard
DESCRIPTION
Use t his sect ion t o specify t he VLANs you want t o look at in t he sect ion below.
Select t his t o look at all t he VLANs on which ARP inspect ion is enabled in t he sect ion
below.
Select t his t o look at all t he VLANs in a specific range in t he sect ion below. Then, ent er
t he lowest VLAN I D ( St a r t V I D ) and t he highest VLAN I D ( En d VI D ) you want t o look
at .
Click t his t o display t he specified range of VLANs in t he sect ion below.
This field displays t he VLAN I D of each VLAN in t he range specified above.
This field displays t he t ot al num ber of ARP packet s received from t he VLAN since t he
Swit ch last rest art ed.
This field displays t he t ot al num ber of ARP Request packet s received from t he VLAN
since t he Swit ch last rest art ed.
This field displays t he t ot al num ber of ARP Reply packet s received from t he VLAN since
t he Swit ch last rest art ed.
This field displays t he t ot al num ber of ARP packet s t he Swit ch forwarded for t he VLAN
since t he Swit ch last rest art ed.
This field displays t he t ot al num ber of ARP packet s t he Swit ch discarded for t he VLAN
since t he Swit ch last rest art ed.
GS2210 Series User's Guide
238