Figure 132 MVR Mult icast Television Exam ple
VLAN 1
A
24.2 Multicast Setup
Use t his screen t o configure I GMP for I Pv4 or MLD for I Pv6 and set up m ult icast VLANs. Click
Adva nce d Applica t ion > M ult ica st in t he navigat ion panel.
Figure 133 Advanced Applicat ion > Mult icast Set up
The following t able describes t he labels in t his screen.
Table 78 Advanced Applicat ion > Mult icast Set up
LABEL
I Pv4 Mult icast
I Pv6 Mult icast
MVR
24.3 IPv4 Multicast Status
Click Adva nce d Applica t ion > M ult ica st > I Pv4 M ult ica st t o display t he screen as shown. This
screen shows t he I Pv4 m ult icast group inform at ion. See
inform at ion on m ult icast ing.
Figure 134 Advanced Applicat ion > Mult icast > I Pv4 Mult icast
Chapter 24 Multicast
DESCRIPTION
Click t he link t o open screens where you can configure I GMP snooping and I GMP filt ering
for I Pv4.
Click t he link t o open screens where you can configure MLD snooping- proxy and MLD
filt ering for I Pv6.
Click t he link t o open screens where you can creat e m ult icast VLANs.
GS2210 Series User's Guide
190
S
Multicast VLAN
Sect ion 24.1 on page 186
for m ore