36.3 OAM Configuration
Use t his screen t o t urn on Et hernet OAM on t he Swit ch and port ( s) and configure t he relat ed
set t ings.
I n t he OAM St a t u s screen click Con figu r a t ion t o display t he configurat ion screen as shown.
Figure 222 Advanced Applicat ion > OAM > OAM Configurat ion
The following t able describes t he labels in t his screen.
Table 156 Advanced Applicat ion > OAM > OAM Configurat ion
LABEL
Act ive
Port
*
Act ive
Chapter 36 OAM
DESCRIPTION
Select t his opt ion t o enable Et hernet OAM on t he Swit ch.
This field displays t he Swit ch's port num ber.
Use t his row t o m ake t he set t ing t he sam e for all port s. Use t his row first and t hen m ake
adj ust m ent s on a port- by- port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select t his check box t o enable Et hernet OAM on t his port .
Clear t his check box t o disable Et hernet OAM on t he port .
GS2210 Series User's Guide
323