Link Aggregation Id; Link Aggregation Status - ZyXEL Communications GS2210-8 User Manual

is, if an operat ional port fails, t hen one of t he " st andby" port s becom e operat ional wit hout user
int ervent ion. Please not e t hat :
• You m ust connect all port s point- t o- point t o t he s am e Et hernet swit ch and configure t he port s for
LACP t runking.
• LACP only works on full- duplex links.
• All port s in t he sam e t runk group m ust have t h e sam e m edia t ype, speed, duplex m ode and flow
cont rol set t ings.
Configure t runk groups or LACP before you connect t he Et hernet swit ch t o avoid causing net work
t opology loops.

Link Aggregation ID

LACP aggregat ion I D consist s of t he following inform at ion
Table 59 Link Aggregat ion I D: Local Swit ch
SYSTEM PRIORITY MAC ADDRESS
0000
Table 60 Link Aggregat ion I D: Peer Swit ch
SYSTEM PRIORITY MAC ADDRESS
0000

17.2 Link Aggregation Status

Click Adva nce d Applica t ion > Lin k Aggr e ga t ion in t he navigat ion panel. The Lin k Aggr e ga t ion
St a t us screen displays by default . See
1. Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
Chapter 17 Link Aggregation
KEY
00- 00- 00- 00- 00- 00 0000
KEY
00- 00- 00- 00- 00- 00 0000
Sect ion 17.1 on page 148
GS2210 Series User's Guide
149
1
:
PORT PRIORITY PORT NUMBER
00 0000
PORT PRIORITY PORT NUMBER
00 0000
for m ore inform at ion.