•
Make sure t he posit ion of t he Swit ch does not m ake t he rack unst able or t op- heavy. Take all
necessary precaut ions t o anchor t he rack securely before inst alling t he unit .
2.3.2 Attaching the Mounting Brackets to the Switch
1
Posit ion a m ount ing bracket on one side of t he Swit ch, lining up t he four screw holes on t he bracket
wit h t he screw holes on t he side of t he Swit ch.
Figure 5 At t aching t he Mount ing Bracket s
2
Using a # 2 Philips screwdriver, inst all t he M3 flat head screws t hrough t he m ount ing bracket holes
int o t he Swit ch.
3
Repeat st eps
4
You m ay now m ount t he Swit ch on a rack. Proceed t o t he next sect ion.
2.3.3 Mounting the Switch on a Rack
1
Posit ion a m ount ing bracket ( t hat is already at t ached t o t he Swit ch) on one side of t he rack, lining
up t he t wo screw holes on t he bracket wit h t he screw holes on t he side of t he rack.
Chapter 2 Hardware Installation and Connection
1
and
2
t o inst all t he second m ount ing bracket on t he ot her side of t he Swit ch.
GS2210 Series User's Guide
25