Arp Inspection Vlan Status; Arp Inspection Log Status - ZyXEL Communications GS1920v2 Series User Manual

26.8 ARP Inspe c tio n VL AN Sta tus
Use this screen to look at various statistics about ARP packets in each VLAN. To open this screen, click
Adva nc e d Applic a tio n > IP So urc e G ua rd > IPv4 So urc e G ua rd Se tup > ARP Inspe c tio n > VL AN Sta tus
Advanced Application > IP Source Guard > IPv4 Source Guard Setup > ARP Inspection >
Fig ure 177
VLAN Status
The following table describes the labels in this screen.
Table 108 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > ARP Inspection >
VLAN Status
L ABEL
Show VLAN range
Enabled VLAN
Selected VLAN
Apply
VID
Received
Request
Reply
Forwarded
Dropped
26.9 ARP Inspe c tio n L o g Sta tus
Use this screen to look at log messages that were generated by ARP packets and that have not been
sent to the syslog server yet. To open this screen, click
So urc e G ua rd Se tup > ARP Inspe c tio n > L o g Sta tus
Chapter 26 IP Source Guard
DESC RIPT IO N
Use this section to specify the VLANs you want to look at in the section below.
Select this to look at all the VLANs on which ARP inspection is enabled in the section below.
Select this to look at all the VLANs in a specific range in the section below. Then, enter the
lowest VLAN ID ( ) and the highest VLAN ID (
Sta rt VID
Click this to display the specified range of VLANs in the section below.
This field displays the VLAN ID of each VLAN in the range specified above.
This field displays the total number of ARP packets received from the VLAN since the Switch
last restarted.
This field displays the total number of ARP Request packets received from the VLAN since
the Switch last restarted.
This field displays the total number of ARP Reply packets received from the VLAN since the
Switch last restarted.
This field displays the total number of ARP packets the Switch forwarded for the VLAN since
the Switch last restarted.
This field displays the total number of ARP packets the Switch discarded for the VLAN since
the Switch last restarted.
GS1920v2 Series User's Guide
249
End VID
Adva nc e d Applic a tio n > IP So urc e G ua rd > IPv4
.
) you want to look at.
.