Anti-Arpscan Configure - ZyXEL Communications GS2210-8 User Manual

The following t able describes t he labels in t his screen.
Table 150 Advanced Applicat ion > Ant i-Arpscan > Trust Host
LABEL
Nam e
Host I P
Mask
Add
Cancel
Clear
I ndex
Nam e
Host I P
Mask
Delet e
Cancel

34.5 Anti-Arpscan Configure

Use t his screen t o enable Ant i- Ar psca n, set port and host t hresholds as well as configure port s t o
be t rust ed or unt rust ed. To open t his screen, click Adva nce d Applica t ion > Ant i- Ar psca n >
Configur e .
Chapter 34 Anti-Arpscan
DESCRIPTION
Type a descript ive nam e of up t o 32 print able ASCI I charact ers t o ident ify t his host .
Type t he I P address of t he host .
A t rust ed host m ay consist of a subnet of I P addresses. Type a subnet m ask t o creat e a
single host or a subnet of host s.
Click t his t o creat e t he t rust ed host .
Click t his t o reset t he values above based or, if not applicable, t o clear t he fields above.
Click t his t o clear t he fields above.
This field displays a sequent ial num ber for each t rust ed host .
This field displays t he nam e of t he t rust ed host .
This field displays t he I P address of t he t rust ed host .
This field displays t he subnet m ask of t he t rust ed host .
Select an ent ry's check box t o select a specific ent ry. Ot herwise, select t he check box in
t he t able heading row t o select all ent ries.
Select an ent ry checkbox and click D e le t e t o rem ove t he specified ent ry.
Click t his t o clear t he check boxes above.
GS2210 Series User's Guide
312