Configuring Subnet Based Vlan - ZyXEL Communications GS2210-8 User Manual

172.16.1.0/ 24, video for 192.168.1.0/ 24 and dat a for 10.1.1.0/ 24. The Swit ch can t hen be
configured t o group incom ing t raffic based on t he source I P subnet of incom ing fram es.
You configure a subnet based VLAN wit h priorit y 6 and VI D of 100 for t raffic received from I P subnet
172.16.1.0/ 24 ( voice services) . You also have a subnet based VLAN wit h priorit y 5 and VI D of 200
for t raffic received from I P subnet 192.168.1.0/ 24 ( video services) . Last ly, you configure VLAN wit h
priorit y 3 and VI D of 300 for t raffic received from I P subnet 10.1.1.0/ 24 ( dat a services) . All
unt agged incom ing fram es will be classified based on t heir source I P subnet and priorit ized
accordingly. That is video services receive t he highest priorit y and dat a t he lowest .
Figure 77 Subnet Based VLAN Applicat ion Exam ple
172.16.1.0/24
VID = 100

9.6.1 Configuring Subnet Based VLAN

Click t he Su bn e t Ba se d VLAN Se t u p link in t he VLAN Con figu r a t ion screen t o display t he
configurat ion screen as shown.
Not e: Subnet based VLAN applies t o un- t agged packet s and is applicable only when you
use I EEE 802.1Q t agged VLAN.
Chapter 9 VLAN
Tagged Frames
Untagged
Frames
10.1.1.0/24
192.168.1.0/24
VID = 300
VID = 200
GS2210 Series User's Guide
102
Internet