ZyXEL Communications GS2210-8 User Manual page 272

Figure 190 Advanced Applicat ion > PPPoE > I nt erm ediat e Agent > VLAN
The following t able describes t he labels in t his screen.
Table 128 Advanced Applicat ion > PPPoE > I nt erm ediat e Agent > VLAN
LABEL DESCRIPTION
Show VLAN Use t his sect ion t o specify t he VLANs you want t o configure in t he sect ion below.
St art VI D Ent er t he lowest VLAN I D you want t o configure in t he sect ion below.
End VI D Ent er t he highest VLAN I D you want t o configure in t he sect ion below.
Apply Click Apply t o display t he specified range of VLANs in t he sect ion below.
VI D This field displays t he VLAN I D of each VLAN in t he range specified above. I f you configure
t he * VLAN, t he set t ings are applied t o all VLANs.
* Use t his row t o m ake t he set t ing t he sam e for all VLANs. Use t his row first and t hen m ake
adj ust m ent s on a VLAN- by-VLAN basis.
Changes in t his row are copied t o all t he VLANs as soon as you m ake t hem .
Enabled Select t his opt ion t o t urn on t he PPPoE I nt erm ediat e Agent on a VLAN.
Circuit- id Select t his opt ion t o m ake t he Circuit I D set t ings for a specific VLAN t ake effect .
Rem ot e- id Select t his opt ion t o m ake t he Rem ot e I D set t ings for a specific VLAN t ake effect .
Apply Click Apply t o save your changes t o t he Swit ch's run- t im e m em ory. The Swit ch loses t hese
changes if it is t urned off or loses power, so use t he Sa ve link on t he t op navigat ion panel t o
save your changes t o t he non- volat ile m em ory when you are done configuring.
Cancel Click Ca n ce l t o begin configuring t his screen afresh.
Chapter 29 PPPoE
GS2210 Series User's Guide
272