Configuring Ipv6 Mbgp Route Dampening - HP MSR ASM Configuration Manual

Step
3. Enter IPv6 MBGP
address family view.
4. Configure IPv6 MBGP
inbound route filtering.
5. Specify the upper limit of
prefixes that can be
imported from a peer or
a peer group.
NOTE:
A peer can have an inbound route filtering policy that is different from the policy of the peer group that it
belongs to. That is, peer group members can have different inbound route filtering policies.

Configuring IPv6 MBGP route dampening

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Configure IPv6 MBGP route
dampening parameters.
Command
ipv6-family multicast
•
Configure inbound route filtering:
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
•
Apply a routing policy to routes from
a peer or a peer group:
peer { ipv6-group-name |
ipv6-address } route-policy
route-policy-name import
•
Specify an IPv6 ACL to filter routes
from a peer or a peer group:
peer { ipv6-group-name |
ipv6-address } filter-policy
acl6-number import
•
Specify an AS path ACL to filter IPv6
BGP routing information from a peer
or a peer group:
peer { ipv6-group-name |
ipv6-address } as-path-acl
as-path-acl-number import
•
Specify an IPv6 prefix list to filter
routes from a peer or a peer group:
peer { ipv6-group-name |
ipv6-address } ipv6-prefix
ipv6-prefix-name import
peer { ipv6-group-name | ipv6-address }
route-limit limit [ percentage ]
Command
system-view
bgp as-number
ipv6-family multicast
dampening [ half-life-reachable
half-life-unreachable reuse
suppress ceiling | route-policy
route-policy-name ]*
424
Remarks
N/A
Use at least one command.
By default, advertised routes are
not filtered.
You can configure a filtering policy
as required.
If you configure several filtering
policies, they are applied in the
following sequence:
•
filter-policy import.
•
peer filter-policy import.
•
peer as-path-acl import.
•
peer ip-prefix import.
•
peer route-policy import.
A filter policy can be applied only
after the previous one is passed.
Routing information can be
received only after passing all the
configured filter policies.
Optional.
The number is unlimited by default.
Remarks
N/A
N/A
N/A
Optional.
Not configured by default.