Mld Configuration Task List; Configuring Basic Mld Functions; Configuration Prerequisites - HP MSR ASM Configuration Manual

MLD configuration task list

For the configuration tasks in this section, the following rules apply:
In MLD view, the configuration is effective globally. In interface view, the configuration is effective
•
on only the current interface.
The configurations made in interface view take precedence over those in MLD view. If you do not
•
make a configuration in interface view, the global configuration in MLD view applies to that
interface.
Complete these tasks to configure MLD:
Task

Configuring basic MLD functions

Adjusting MLD performance
Configuring MLD SSM mapping
Configuring MLD proxying
Configuring basic MLD functions
This section describes how to configure basic MLD functions.

Configuration prerequisites

Before you configure basic MLD functions, complete the following tasks:
• Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
domain are interoperable at the network layer.
Configure IPv6 PIM-DM or IPv6 PIM-SM.
•
Determine the MLD version.
•
• Determine the IPv6 multicast group address and IPv6 multicast source address for static group
member configuration.
Determine the ACL rule for IPv6 multicast group filtering.
•
Enabling MLD
Configuring the MLD version
Configuring static joining
Configuring an IPv6 multicast group filter
Setting the maximum number of IPv6 multicast
groups that an interface can join
Configuring Router-Alert option handling methods
Configuring MLD query and response parameters
Enabling MLD fast-leave processing
Enabling the MLD host tracking function
Enabling MLD SSM mapping
Configuring MLD SSM mapping entries
Enabling MLD proxying
Configuring IPv6 multicast forwarding on a
downstream interface
276
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.