Igmp Snooping Querier Configuration Example - HP MSR ASM Configuration Manual

IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
MAC group(s):
MAC group address:0100-5e01-0101
The output shows that Ethernet 1/3 of Switch A has become a static router port.
# Display detailed IGMP snooping group information in VLAN 100 on Switch C.
[SwitchC] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
MAC group(s):
MAC group address:0100-5e01-0101
The output shows that Ethernet 1/3 and Ethernet 1/5 on Switch C have become static member
ports for multicast group 224.1.1.1.

IGMP snooping querier configuration example

Network requirements
An MSR with a fixed Layer 2 Ethernet switching interface or a Layer 2 switching interface module acts as
a switch (Switch A in
Eth1/1
Eth1/3
Attribute: Host Port
Host port(s):total 1 port.
Eth1/2
Host port(s):total 1 port.
Eth1/2
Eth1/2
Attribute: Host Port
Host port(s):total 2 port.
Eth1/3
Eth1/5
Host port(s):total 2 port.
Eth1/3
Eth1/5
Figure 48).
(D) ( 00:01:30 )
(S)
(D) ( 00:03:23 )
(D) ( 00:01:23 )
(S)
(S)
161