Displaying And Maintaining Ipv6 Multicast Routing And Forwarding - HP MSR ASM Configuration Manual

Step
3. Configure the maximum
number of downstream nodes
for a single IPv6 multicast
forwarding entry.
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast transmission failures.
To display and maintain IPv6 multicast routing and forwarding:
Task
Display IPv6 multicast
boundary information.
Display information about
the IPv6 multicast
forwarding table.
Display the DF information
of the IPv6 multicast
forwarding table.
Display information about
the IPv6 multicast routing
table.
Display the RPF route
information of the specified
IPv6 multicast source.
Display the minimum hop
limit required for an IPv6
multicast packet to be
forwarded.
Command
multicast ipv6 forwarding-table
downstream-limit limit
Command
display multicast ipv6 boundary { group
[ ipv6-group-address [ prefix-length ] ] | scope
[ scope-id ] } [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
display multicast ipv6 forwarding-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } | outgoing-interface
{ exclude | include | match } { interface-type
interface-number | register } | statistics ] *
[ port-info ] [ | { begin | exclude | include }
regular-expression ]
display multicast ipv6 forwarding-table df-info
[ rp-address ] [ | { begin | exclude | include }
regular-expression ]
display multicast ipv6 routing-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } | outgoing-interface
{ { exclude | include | match } { interface-type
interface-number | register } } ] * [ | { begin |
exclude | include } regular-expression ]
display multicast ipv6 rpf-info ipv6-source-address
[ ipv6-group-address ] [ | { begin | exclude |
include } regular-expression ]
display multicast ipv6 minimum-hoplimit
[ interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
380
Remarks
Optional.
The default is 128.
Remarks
Available in any view.
Available in any view.
Available in any view.
For more information
about DF, see
"Configuring IPv6 PIM."
Available in any view.
Available in any view.
Available in any view.