Configuring Bgp Route Dampening - HP 6125XLG Layer 3 - Ip Routing Configuration Manual

Step
3. Enter BGP IPv6 unicast
address family view or
BGP-VPN IPv6 unicast
address family view.
4. Configure BGP route
reception filtering policies.

Configuring BGP route dampening

Route dampening enables BGP to not select unstable routes as optimal routes. This feature applies to
EBGP routes but not to IBGP routes.
To configure BGP route dampening (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
Command
address-family ipv6 [ unicast ]
•
Reference ACL or IPv6 prefix list to
filter BGP routes received from all
peers:
filter-policy { acl6-number |
prefix-list ipv6-prefix-name } import
•
Reference a routing policy to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
route-policy route-policy-name
import
•
Reference an ACL to filter BGP routes
received from a peer or peer group:
peer { group-name | ipv6-address }
filter-policy acl6-number import
•
Reference an AS path list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
as-path-acl as-path-acl-number
import
•
Reference an IPv6 prefix list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ipv6-address }
prefix-list ipv6-prefix-name import
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
215
Remarks
N/A
Use at least one method.
By default, no route reception
filtering is configured.
Remarks
N/A
N/A