HP MSR ASM Configuration Manual page 303

[RouterD] interface ethernet 1/2
[RouterD-Ethernet1/2] pim ipv6 sm
[RouterD-Ethernet1/2] quit
[RouterD] interface ethernet 1/3
[RouterD-Ethernet1/3] pim ipv6 sm
[RouterD-Ethernet1/3] quit
# Enable IPv6 multicast routing on Router A, and enable IPv6 PIM-SM on each interface.
<RouterA> system-view
[RouterA] multicast ipv6 routing-enable
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] pim ipv6 sm
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] pim ipv6 sm
[RouterA-Ethernet1/2] quit
[RouterA] interface ethernet 1/3
[RouterA-Ethernet1/3] pim ipv6 sm
[RouterA-Ethernet1/3] quit
The configuration on Router B and Router C is similar to that on Router A.
Configure C-BSR and C-RP interfaces on Router D.
3.
[RouterD] pim ipv6
[RouterD-pim6] c-bsr 1003::2
[RouterD-pim6] c-rp 1003::2
[RouterD-pim6] quit
4. Configure the IPv6 SSM group range:
# Configure the IPv6 SSM group range FF3E::/64 on Router D.
[RouterD] acl ipv6 number 2000
[RouterD-acl6-basic-2000] rule permit source ff3e:: 64
[RouterD-acl6-basic-2000] quit
[RouterD] pim ipv6
[RouterD-pim6] ssm-policy 2000
[RouterD-pim6] quit
# Configure the IPv6 SSM group range on Router A, Router B and Router C in the same way.
(Details not shown.)
5. Configure MLD SSM mappings on Router D.
[RouterD] mld
[RouterD-mld] ssm-mapping ff3e:: 64 1001::1
[RouterD-mld] ssm-mapping ff3e:: 64 3001::1
[RouterD-mld] quit
Verifying the configuration
# Display MLD SSM mapping information for IPv6 multicast group FF3E::101 on Router D.
[RouterD] display mld ssm-mapping ff3e::101
Group: FF3E::101
Source list:
1001::1
3001::1
291