HP MSR ASM Configuration Manual page 118

# On Router C, enable IP multicast routing, enable PIM-SM on each interface, and enable
BIDIR-PIM.
<RouterC> system-view
[RouterC] multicast routing-enable
[RouterC] interface serial 2/1
[RouterC-Serial2/1] pim sm
[RouterC-Serial2/1] quit
[RouterC] interface serial 2/2
[RouterC-Serial2/2] pim sm
[RouterC-Serial2/2] quit
[RouterC] interface loopback 0
[RouterC-LoopBack0] pim sm
[RouterC-LoopBack0] quit
[RouterC] pim
[RouterC-pim] bidir-pim enable
# On Router D, enable IP multicast routing, enable PIM-SM on each interface, enable IGMP on
interface Ethernet 1/1, and enable BIDIR-PIM.
<RouterD> system-view
[RouterD] multicast routing-enable
[RouterD] interface ethernet 1/1
[RouterD-Ethernet1/1] igmp enable
[RouterD-Ethernet1/1] pim sm
[RouterD-Ethernet1/1] quit
[RouterD] interface ethernet 1/2
[RouterD-Ethernet1/2] pim sm
[RouterD-Ethernet1/2] quit
[RouterD] interface serial 2/1
[RouterD-Serial2/1] pim sm
[RouterD-Serial2/1] quit
[RouterD] pim
[RouterD-pim] bidir-pim enable
[RouterD-pim] quit
3. On Router C, configure Serial 2/1 as a C-BSR, and loopback interface 0 as a C-RP for the entire
BIDIR-PIM domain.
[RouterC-pim] c-bsr serial 2/1
[RouterC-pim] c-rp loopback 0 bidir
[RouterC-pim] quit
Verifying the configuration
# Display the DF information of BIDIR-PIM on Router A.
[RouterA] display pim df-info
VPN-Instance: public net
RP Address: 1.1.1.1
Interface
Eth1/1
Ser2/1
# Display the DF information of BIDIR-PIM on Router B.
State DF-Pref
Win 100
Lose 100
106
DF-Metric DF-Uptime DF-Address
2 01:08:50
1 01:07:49
192.168.1.1 (local)
10.110.1.2