Ipv6 Pim-Ssm Configuration Example - HP MSR ASM Configuration Manual

MID: 0, Flags: 0x2100000:0
Uptime: 00:07:21
RPF interface: LoopBack0
List of 2 DF interfaces:
1: Serial2/1
2: Serial2/2
# Display the DF information of the IPv6 multicast forwarding table on Router D.
[RouterD] display multicast ipv6 forwarding-table df-info
Multicast DF information
Total 1 RP
Total 1 RP matched
00001. RP Address: 6001::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Serial2/1
List of 2 DF interfaces:
1: Ethernet1/1
2: Ethernet1/2

IPv6 PIM-SSM configuration example

Network requirements
The receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM
domain operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
The SSM group range is FF3E::/64.
MLDv2 runs between Router A and N1 and between Router B, Router C, and N2.
367