HP MSR ASM Configuration Manual page 48

[RouterD] interface ethernet 1/2
[RouterD-Ethernet1/2] pim sm
[RouterD-Ethernet1/2] quit
[RouterD] interface ethernet 1/3
[RouterD-Ethernet1/3] pim sm
[RouterD-Ethernet1/3] quit
# Enable IP multicast routing on Router A, and enable PIM-SM on each interface.
<RouterA> system-view
[RouterA] multicast routing-enable
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] pim sm
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] pim sm
[RouterA-Ethernet1/2] quit
[RouterA] interface ethernet 1/3
[RouterA-Ethernet1/3] pim sm
[RouterA-Ethernet1/3] quit
The configuration on Router B and Router C is similar to that on Router A.
Configure C-BSR and C-RP interfaces on Router D.
3.
[RouterD] pim
[RouterD-pim] c-bsr ethernet 1/3
[RouterD-pim] c-rp ethernet 1/3
[RouterD-pim] quit
4. Configure the SSM group range:
# Configure the SSM group range 232.1.1.0/24 on Router D.
[RouterD] acl number 2000
[RouterD-acl-basic-2000] rule permit source 232.1.1.0 0.0.0.255
[RouterD-acl-basic-2000] quit
[RouterD] pim
[RouterD-pim] ssm-policy 2000
[RouterD-pim] quit
# Configure the SSM group range on Router A, Router B and Router C in the same way. (Details
not shown.)
5. Configure IGMP SSM mappings on Router D.
[RouterD] igmp
[RouterD-igmp] ssm-mapping 232.1.1.0 24 133.133.1.1
[RouterD-igmp] ssm-mapping 232.1.1.0 24 133.133.3.1
[RouterD-igmp] quit
Verifying the configuration
# Display the IGMP SSM mapping information for multicast group 232.1.1.1 on the public network on
Router D.
[RouterD] display igmp ssm-mapping 232.1.1.1
Vpn-Instance: public net
Group: 232.1.1.1
Source list:
36