HP MSR ASM Configuration Manual page 276

# Configure an IP address and enable PIM-SM on Ethernet 1/2.
[CEa1] interface ethernet 1/2
[CEa1-Ethernet1/2] ip address 10.11.1.2 24
[CEa1-Ethernet1/2] pim sm
[CEa1-Ethernet1/2] quit
# Configure an IP address for Loopback 1, and enable PIM-SM.
[CEa1] interface loopback 1
[CEa1-LoopBack1] ip address 2.2.2.2 32
[CEa1-LoopBack1] pim sm
[CEa1-LoopBack1] quit
# Configure Loopback 1 as a C-BSR and a C-RP for VPN a.
[CEa1] pim
[CEa1-pim] c-bsr loopback 1
[CEa1-pim] c-rp loopback 1
[CEa1-pim] quit
# Configure OSPF.
[CEa1] ospf 1
[CEa1-ospf-1] area 0.0.0.0
[CEa1-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[CEa1-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255
[CEa1-ospf-1-area-0.0.0.0] quit
[CEa1-ospf-1] quit
6. Configure CE b1:
# Enable IP multicast routing.
<CEb1> system-view
[CEb1] multicast routing-enable
# Configure an IP address and enable PIM-SM on Ethernet 1/1.
[CEb1] interface ethernet 1/1
[CEb1-Ethernet1/1] ip address 10.11.6.1 24
[CEb1-Ethernet1/1] pim sm
[CEb1-Ethernet1/1] quit
# Configure an IP address and enable PIM-SM on Ethernet 1/2.
[CEb1] interface ethernet 1/2
[CEb1-Ethernet1/2] ip address 10.11.2.2 24
[CEb1-Ethernet1/2] pim sm
[CEb1-Ethernet1/2] quit
# Configure OSPF.
[CEb1] ospf 1
[CEb1-ospf-1] area 0.0.0.0
[CEb1-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255
[CEb1-ospf-1-area-0.0.0.0] quit
[CEb1-ospf-1] quit
7. Configure CE a2:
# Enable IP multicast routing.
<CEa2> system-view
[CEa2] multicast routing-enable
264