HP MSR ASM Configuration Manual page 194

Configure Loopback 0 as the C-BSR and C-RP of the related PIM-SM domain on Router B, Router C, and
Router E.
Set up MSDP peering relationships between the RPs of the PIM-SM domains to share multicast source
information among the PIM-SM domains.
Figure 54 Network diagram
Table 14 shows the interface and IP address assignment, and network topology scheme.
Table 14 Interface and IP address assignment
Device
Router A
Router A
Router A
Router B
Router B
Router B
Router C
Router C
Router C
Router C
Router D
Router D
Router E
Router E
Interface
Ethernet 1/1
Ethernet 1/2
Ethernet 1/3
Ethernet 1/1
POS 5/0
Loopback 0
Ethernet 1/1
Serial 2/0
POS 5/0
Loopback 0
Ethernet 1/1
Ethernet 1/2
Ethernet 1/1
Serial 2/0
182
IP address
10.110.1.2/24
10.110.2.1/24
10.110.3.1/24
10.110.1.1/24
192.168.1.1/24
1.1.1.1/32
10.110.4.1/24
192.168.3.1/24
192.168.1.2/24
2.2.2.2/32
10.110.4.2/24
10.110.5.1/24
10.110.6.1/24
192.168.3.2/24