Protocols And Standards; Igmp Snooping Configuration Task List - HP MSR ASM Configuration Manual

Ip multicast
Table of Contents

Advertisement

Protocols and standards

RFC 4541, Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches

IGMP snooping configuration task list

For the configuration tasks in this section, the following rules apply:
The configurations made in IGMP-snooping view are effective on all VLANs. The configurations
made in VLAN view are effective on only the current VLAN. For a given VLAN, the configurations
made in IGMP-snooping view are effective only if you do not make the same configuration in VLAN
view.
The configurations made in IGMP-snooping view are effective on all ports. The configurations made
in Layer 2 Ethernet interface view or Layer 2 aggregate interface view are effective on only the
current port. The configurations made in port group view are effective on all ports in only the current
port group. For a given port, the configurations made in IGMP-snooping view are effective only if
you do not make the same configuration in Layer 2 Ethernet interface view, Layer 2 aggregate
interface view, or port group view.
For IGMP snooping, the configurations made on a Layer 2 aggregate interface do not interfere with
the configurations on its member ports, nor do they take part in aggregation calculations. The
configurations made on a member port of the aggregate group will take effect after the port leaves
the aggregate group.
Complete these tasks to configure IGMP snooping in a VLAN:
Task
Configuring basic IGMP
snooping functions
Configuring IGMP snooping
port functions
Configuring IGMP snooping
querier
Configuring IGMP snooping
proxying
Enabling IGMP snooping
Specifying the version of IGMP snooping
Setting aging timers for dynamic ports
Configuring static ports
Configuring a port as a simulated member host
Enabling IGMP snooping fast-leave processing
Disabling a port from becoming a dynamic router port
Enabling IGMP snooping querier
Configuring parameters for IGMP queries and responses
Configuring source IP addresses for IGMP queries
Enabling IGMP snooping proxying
Configuring the source IP addresses for the IGMP
messages sent by the proxy
140
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr sfmMsr ssm

Table of Contents