Enabling The Ipv6 Mbgp Orf Capability - HP MSR ASM Configuration Manual

Step
4. Enable IPv6 BGP route refresh
for a peer or a peer group.
Performing soft reset manually
If the peer does not support route refresh, you can use the peer keep-all-routes command to save all the
route updates from the peer, and then use the refresh bgp ipv6 multicast command to soft-reset IPv6
MBGP connections to refresh the IPv6 MBGP routing table and apply the new policy without terminating
IPv6 MBGP connections.
To perform soft reset manually:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Enter IPv6 MBGP address
family view.
5. Keep all routes from a peer or
a peer group regardless of
whether they pass the
inbound filtering policy.
6. Perform soft reset manually.

Enabling the IPv6 MBGP ORF capability

The BGP Outbound Route Filter (ORF) feature enables a BGP speaker to send a set of ORFs to its BGP
peer through route-refresh messages. The peer then applies the ORFs, in addition to its local routing
policies (if any), to filter updates to the BGP speaker, thus reducing the number of exchanged update
messages and saving network resources.
After you enable the ORF capability, the local BGP router negotiates the ORF capability with the BGP
peer through open messages. That is, the router determines whether to carry ORF information in
messages, and if yes, whether to carry non-standard ORF information in the packets. After completing
the negotiation process and establishing the neighboring relationship, the BGP router and its BGP peer
can exchange ORF information through specific route-refresh messages.
For the parameters configured on both sides for ORF capability negotiation, see
To enable the IPv6 MBGP ORF capability:
Step
1. Enter system view.
2. Enter BGP view.
Command
peer { ipv6-group-name |
ipv6-address } capability-advertise
route-refresh
Command
system-view
bgp as-number
ipv6-family
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address } keep-all-routes
refresh bgp ipv6 multicast { all |
ipv6-address | group
ipv6-group-name | external |
internal } { export | import }
Command
system-view
bgp as-number
428
Remarks
Optional.
Enabled by default.
Remarks
N/A
N/A
N/A
N/A
Not kept by default.
Optional.
Table 34.
Remarks
N/A
N/A