Configuring Ipv6 Administrative Scoping - HP MSR ASM Configuration Manual

To disable the BSM semantic fragmentation function:
Step
1. Enter system view.
2. Enter IPv6 PIM view.
3. Disable the BSM semantic
fragmentation function.

Configuring IPv6 administrative scoping

With IPv6 administrative scoping disabled, an IPv6 PIM-SM domain has only one BSR. The BSR
manages the whole network. To manage your network more effectively and specifically, you can
partition the IPv6 PIM-SM domain into multiple IPv6 admin-scoped zones. Each IPv6 admin-scoped zone
maintains a BSR, which serves a specific IPv6 multicast group range. The IPv6 global-scoped zone also
maintains a BSR, which serves the IPv6 multicast groups with the Scope field in the group addresses
being 14.
Enabling IPv6 administrative scoping
Before you configure an IPv6 admin-scoped zone, you must enable IPv6 administrative scoping.
Perform the following configuration on all routers in the IPv6 PIM-SM domain.
To enable IPv6 administrative scoping:
Step
1. Enter system view.
2. Enter IPv6 PIM view.
3. Enable IPv6 administrative
scoping.
Configuring an IPv6 admin-scoped zone boundary
ZBRs form the boundary of each IPv6 admin-scoped zone. Each admin-scoped zone maintains a BSR,
which serves multicast groups with a specific Scope field in their group addresses. Multicast protocol
packets (such as assert messages and bootstrap messages) that belong to this range cannot cross the
admin-scoped zone boundary.
Perform the following configuration on routers that you want to configure as a ZBR.
To configure an IPv6 admin-scoped zone boundary:
Step
1. Enter system view.
2. Enter interface view.
3. Configure an IPv6 multicast
forwarding boundary.
Command
system-view
pim ipv6
undo bsm-fragment enable
Command
system-view
pim ipv6
c-bsr admin-scope
Command
system-view
interface interface-type
interface-number
multicast ipv6 boundary
{ ipv6-group-address prefix-length |
scope { scope-id | admin-local |
global | organization-local |
site-local } }
322
Remarks
N/A
N/A
By default, the BSM semantic
fragmentation function is enabled.
Remarks
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
By default, no multicast forwarding
boundary is configured.